PROWATCHNeo +: Monitoring system

PROWATCHNeo +: Monitoring system

Surveillance of radio and television signals on terrestrial, cable and satellite systems with remote control from a single control center. SNMP protocol and Dataminer® compatible.

The PROWATCH Neo + is a monitoring system oriented to supervise radio and TV broadcasting , cable TV and satellite TV networks in the 5 to 2500 MHz frequency band. It is also possible to survey IPTV, ASI-TS or WiFi in the 2.4 and 5.7 GHz bands. It is possible to survey digital terrestrial transmissions in DVB-T, DVB-T2, ATSC, ISDB-T/TB and J.83B, Cable TV in QAM and DVB-C2 and satellite in DSS, DVB-S and DVB-S2.

PROWATCH Neo + provides full remote control for the different parameters in all the sites to warrant quality of the complete network.


  • The password is Password. Please release the system for another user when you have finished by clicking on CONFIG > LOGOUT.
  • The system supports one user at a time. Please wait a minute if it is busy.

The monitoring system is SNMP compatible, letting it be part of any SNMP manager system already in use by the network operator. Building a monitoring network with the PROWATCH Neo + is as simple as adding as many remote stations as required.

PROMAX can provide the MIB files that will allow the integration of the monitoring and telemetry equipment in any SNMP control system, including some of the most renowned SNMP managers in the broadcast industry such as the DataMiner®.

  • DVB-T, DVB-T2, DVB-T2 lite, ATSC, ISDB-T/Tb, J.83B
  • DVB-C, DVB-C2
  • DVB-S, DVB-S2, DVB-S2 Multistream
  • DSS, ACM / VCM / CCM
  • DAB, DAB+ (opcional)
  • FM
AUDIO CODECS MPEG-1, MPEG-2, HE-AAC, Dolby Digital, Dolby Digital Plus, AAC
  • Universal RF input 75 Ω
  • HDMI™ output
  • IP input for remote control
  • Analogue Video/Audio input
  • 2 x USB (Type-A) for data transfering
  • Constellation diagram
  • LTE ingress test
  • Dynamic echoes analysis
  • StealthID (instant identification of tuning parameters)
  • PLS (Physical Layer Scrambling)
  • Ultra fast spectrum analyzer (70 ms sweep time)
  • MAX and MIN hold
  • FM RDS radio measurement and decoding
  • Screenshots and Datalogger for measurement reports
  • Beacon-Flyaways SNG and VSAT
  • Wideband LNB
  • WiFi 2.4 GHz
  • LTE 1.8 GHz
  • OTT
  • Service Recording
  • Field strength measurement
  • Task planner
  • Merogram
  • Spectrogram
  • Signal Monitoring
  • Remote control (webControl)
  • MER by carrier
  • GPS coverage analysis (optional)
  • Channel Monitoring
Storage capacity 500,000 RF spectrum samples
Maximum registering time More than 11 months (1 sample/minute)
Alarm generation algorithms
  • FM: Identification of carrier changes based on a minimum user-defined level
  • TV: Identification of carrier changes based on a channel plan, a minimum user-defined level and against a spectrum sample reference stored as a correct template
  • MAX/MIN: Spectrum band supervision of level so as to control that minimum and maximum user-defined thresholds are not surpassed
  • % deviation: Spectrum supervision and detection of deviation amount from a user-defined threshold over a spectrum sample reference stored as a correct template
  • Spectrum monitoring and storage
  • 8 RF inputs - no redundant power supply (system embedded in 1U rack format)
  • 16 RF inputs with redundant power supply (system embedded in 2U rack format)
  • Redundant power supply for 8 inputs systems (requires embedding the system in 2U rack format)
  • WiFi 5 GHz and LTE 2.6 GHz
  • Optical measurements in FTTH, Cable TV and Satellite networks (included WiFi 5 GHz and LTE 2.6 GHz)
  • PROWATCH TM Telemetry gathering system
  • Remote reset via PDU
  • AM-060 Antenna for drive test and coverage analysis

Subscribe to our e-News

Special offers, promotions and new product information only for you.