ATLAS NG: The ATSC 3.0 and DVB universal broadcast analyzer

ATLAS NG is a multipurpose NextGen TV ATSC 3.0 and DVB analyzer which includes 5G and covers the most stringent requirements for broadcast professionals, with ST 2110 protocol support (optional). DVB-S2x, IPTV, Fiber optics, 3G-SDI, Transport stream ASI, Wi-Fi… all checked!

Datasheet

Video

Manual

REQUEST A QUOTE

Do you need more help?

The PROMAX ATLAS NG stands as the ultimate solution in professional field strength meters for broadcast and telecommunications engineering. Designed for high-demand environments, this universal analyzer features an extended frequency range up to 6 GHz, enabling precise monitoring in the S and C bands, where coexistence with wireless technologies is critical.

As a cutting-edge tool, it integrates the latest standards: NextGenTV (ATSC 3.0), DVB-S2x, and an advanced 5G interference detection system, ensuring signal integrity across any transmission scenario. Its analytical capabilities extend beyond RF; the ATLAS NG serves as a bridge to modern production thanks to its support for the SMPTE ST 2110 protocol, essential for the transition to All-IP infrastructures and synchronization with master clocks in studio workflows.

Featuring a dedicated 3G-SDI input, it offers deep diagnostic tools such as eye diagram analysis and a professional audio analyzer. Furthermore, its powerful IPTV analyzer and ASI stream management allow for the monitoring of video transport networks with total reliability. All of this is housed under a customizable multi-touch interface that optimizes user experience, turning technical complexity into operational efficiency for both installers and broadcast engineers.

BROADCAST STANDARDS
Digital terrestrial TV / Radio	DVB-T, DVB-T2 (T2-base, T2-lite), ISDB-T/Tb (full seg / 1seg), ATSC 1.0, ATSC 3.0, DAB, DAB+
Digital cable	DVB-C, DVB-C2, J.83 annex-B, 16/64/256-QAM
Digital satellite	DVB-S, DVB-S2 VCM/ACM/CCM, DVB-S2x, DSS, QPSK
Analogue	Analogue terrestrial (PAL, SECAM, NTSC), FM RDS

SPECTRUM ANALYZER MODE	From 5 MHz to 6 GHz

IPTV MULTICAST/UNICAST OPERATING MODE	More than 20 measurements (including Jitter, Packet rate, Histogram + jitter, Inter Packet Arrival Time). Multicast. T2MI&BTS reception.

SD/HD/3G-SDI OPERATING MODE	3 Gbps input/output. Eye statistical diagram, CRC error detection, 16 AES3 audio channel monitoring, 1080p 60 pattern chart.

STREAMING ANALYZER MODE	SRT reception in caller, listener, and rendezvous modes. More than 12 metrics including RTT, latency, NACK packets, and received TS analysis. OTT measurements.

WIFI 802.11 ac/a/b/g/n ANALYZER OPERATING MODE	Spectrum analyzer + WiFi dongle. RSSI, Access point occupancy, SNR, Noise

ASI-TS OPERATING MODE	ASI-TS TS, T2MI and BTS support

4G/5G (optional) TELEPHONY OPERATING MODE	Dual SIM. Uplink/Downlink bands indication over the spectrum. Measurements: RSSI, RSRP, RSRQ, SINR, SRXLEV.

INPUTS AND OUPUTS

Universal RF input (N-type, female 50 Ω)
ASI/SDI input and output (BNC female, 75 Ω 3 Gbps)
SFP+ connector
Analogue audio/video input (jack 3.5 mm)
HDMI™ output (v1.4b up to 3840x2160 pixels @30 Hz)
USB 2.0 master/device (Type C). Mass storage and remote control commands
Ethernet (RJ45) for webControl and remote control commands
Optical input (FC/APC, female)
1 PPS / 10 MHz reference input
IPTV input (RJ45 Ethernet, 10/100/1000 Mbps)
Stereo headphone audio output (jack 3.5 mm)
USB 3.0 host (A-type, USB-CDC devices)
CAM (DVB-CI compliant, module input
Double SIM card slot (optional)

FUNCTIONS

SMPTE ST2110 measurements (optional)
SRT measurements
4K decoder
Screenshots
Service recording
Task planner
Signal monitoring
Remote control (webControl)
Video/Audio streaming
TS recording
TS analysis
IPTV multicast: measurement, decoding
Eye diagram (HD-SDI, 3G-SDI)
8 GB internal memory, expandable via USB
OTT
Constellation diagram
LTE ingress test
Dynamic echoes analysis
StealthID (instant identification of tuning parameters)
PLS (Physical Layer Scrambling)
Ultra fast spectrum
MAX and MIN hold
FM RDS measurement and decoding
Datalogger
Beacon-Flyaways SNG and VSAT
Wideband LNB
WiFi
LTE 1.8 GHz
Field strength
Merogram
Spectrogram
MER by carrier
GPS (included) coverage analysis
ALP recording
Full band optical power measurement
SCAN + TILT
Shoulder attenuation
Network delay
DVB-2 MI analysis
Carrier Frequency Drift Test

OPTIONS	Optical fibre: Selective optical power meter + optical to RF converter Advanced measurements for FM radio Advanced measurements for DAB/DAB+ digital radio 4G/5G measurements Optical SDI and ASI output Optical SDI and ASI input ST2110 protocol support

Comparative table ATLAS and RANGER analyzers
More details on ATLAS NG
What is ATSC 3.0 and what are its innovations?
ATSC 3.0 technical overview
Key factors that make ATLAS NG broadcast analyzer a multidisciplinary equipment

Quick reference guide (English) (465 KB)
Quick reference guide (Spanish) (2,38 MB)
User manual (English) (6,93 MB)
Quick reference guide (French) (496 KB)
User manual (Spanish) (6,96 MB)
Quick reference guide (German) (491 KB)
Firmware release 4.1.0 for the ATLAS series Update procedure: Requires ATLAS software version above 1.4.0. Reboot your equipment (important), then supply it by AC power to avoid running out of battery. Unzip the file to the root of a pendrive and insert it in the top USB port of the instrument. Perform the update by selecting Settings › Software update. (1262,70 MB)